Well, however, the second ring of TRRS connectors in the camera “cut from” the sleeve portion of the plug but I would suggest using a TRS to TRRS adaptor to minimize the noise and signal loss. Bottom Line: TRS to TRRS TRS connectors are used with monitoring headphones, studio monitors, mixers, audio interfaces, and instruments.

The SC15 is a Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. It is particularly suitable for connecting the VideoMic NTG to iPhones or iPads with a Lightning input. SC16 – USB-C to USB-C Cable (300mm) In short, a balanced audio cable cancels out the noise and gives you more clear audio signal. This will give you 4dB extra headroom in audio mixing and mastering.USB outputs are usually found on microphones intended for use with computers and mobile devices, like the RØDE NT-USB and NT-USB Mini, VideoMic Me range or Wireless GO II. The RODE SC4 gives you a premium shielded TRS to TRRS adapter cable. Offering the perfect solution for connecting microphones with a 3.5mm output to your smartphones or tablet devices. This is ideal if you’re looking to connect your VideoMic to your iPhone, and record using the Rec App for iOS. Although it’s designed primarily for iPhones and iPads, the SC4 will also work perfectly with most android devices. TRRS connectors are mainly used in consumer-grade electronics such as iPhones, iPad, and other mobile phones. XLR outputs are used for microphones intended to be plugged into professional audio equipment like mixers and audio interfaces, such as our studio and shotgun microphone range.

These TRS-to-TRRS connectors minimize signal loss and noise and you will get clear audio without losing audio quality. The SC9 is a TRRS to TRRS cable designed to connect a wide range of audio devices. At 1.5 metres long, it is particularly suitable for connecting a smartphone to the RØDECaster Pro. SC10 – 3.5mm TRRS to TRRS Cable

Rode SC4

So, there is actually not enough use of TRRS in music production. Why Do You Need to Convert TRS to TRRS? USB-A – You should be familiar with this type of cable. USB-A is one of the most common connections found on virtually every modern computer (and many other devices). Itiseasy to identify as itislarger than other USB types. You know the one – the classic rectangular USB cable. Above all, the SC4 is another essential tool from RODE’s lineup of utility adapters. So you can’t go past the SC4 when you’re looking for a TRS to TRRS adapter to deliver high-quality audio. TRS is widely used in music production. The most common use of TRS cable is to carry balanced mono audio signals.

The SC5 is a TRS to TRS cable that comes with the Wireless GO II (not sold separately) for connecting it to cameras and other devices with a TRS input. It features a memory wire cable rather than a coiled cable like the SC2, making it easyto route around a camera. If you’re a creator, there’s a good chance you use multiple microphones to record with multiple devices in a wide variety of scenarios. This may mean the cable that came with your microphone doesn’t quite do the job in every scenario you need it to – either it’s not the right length, or the connection type is wrong for your recording device. Thankfully, we offer a range of high-quality cables and adaptors to suit a wide variety of applications. I hope this article helped you in this. Let me know in the comments if you have any suggestions or queries. USB-C – USB-C is a more versatile connection than USB-A in several ways. It allows for a faster data transfer rate, as well as a higher power link, meaning faster charging and the ability to run more power-hungry devices. USB-C connectors are also smaller than USB-A. They are increasingly utilised in computers and mobile devices, as well as microphones and other audio devices.The SC7 is a TRS to TRRS patch cable, designed to allow microphones with a 3.5mm TRS output, such a RØDE VideoMic or Wireless GO, to connect to devices with a TRRS input like a computer or mobile device. SC8 – 3.5mm TRS to TRS cable (6m) The same goes for microphones. Video mics such as Rode VMPR VideoMic Pro have TRS connectors and most of the cameras have TRRS ports. Ok, let’s dive into our wide range of cables for all your connection needs. SC1 – TRRS Extension Cable (6m) The SC19 is a 1.5m-long Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. SC20 – USB-C to USB-A for Wireless GO II (Not Available Separately) The SC10 is a TRRS to TRRS cable designed to connect the VideoMic NTG (which has an auto-sensing TRS/TRRS output) to cameras or mobile devices, but can be used with any TRRS device.